DESCRIPTION
#1004 Rust Primer with special
additives for treating rusted metal surfaces. Changes regulars
iron oxide and render it inert. Prohibits the common bleed through associated
with most primers.
SUBSTRTE PREPARATION
All surfaces shall be free
of dirt, dust, and grease process oils. Well-adhered paints of other materials
may remain. Power washing or hand scraping should also remove the heavy flaky
rust. The remaining tight rust well-adhered paint are
now completed by hand using rollers or brushes. Use good quality 1/4" to
1/2" nap rollers and synthetic brushes.
* Excellent coverage
rates.
* Superior
penetration into all surface areas.
* Complete
sealing of entire surface area.
* Quick
cure time allowing coating application to begin.
* Maximum
adhesion to both surface and coating.
* Compatible
with virtually all coatings.
* Durable
chemical resistant dry film.
* Water
base for easy clean up.
* Environmentally
sound VOC compliant.
COLOR ― white
ADHENSION ― Superior exceeds all
testing requirement ASTM-D-3359
CHEMICAL
RESISTANCE ―
Superior protection from acid rain and
other airborne
pollutants.
WEIGHT PER
GALOON ― 9.0 lbs.
COVERAGE ― Est. 250 Sq. Ft. PER
Gallon
CURE TIME ― 1 HOUR @ 70F humidity @50%
CONTAINER SIZE ― 5 gallon pails, 55 gallon
drums.
CAUTION
Do
not apply SEALMARK products when rain or moisture in any form is imminent. It
is necessary for Sealmark to fully cure before the introduction of moisture or
contact, in any form, takes place. Dispose of all containers as per state,
federal or local regulations. Keep away from children. If swallowed, contact a
physician immediately.
(TECHNICAL
AND JOBS SITE ASSISTANCE UPON RESUEST)
Sealmark
Corporation, USA (1999)
Distributed by